ABA film blowing machine

There are 4 or 6 adjustment bolts in the head of ABA film blower. Generally, they are hexagonal inside. At the top edge of the head, they can be adjusted. As for tightness or looseness, the moulds from different origins are different, so they can be known by hand. Clean the head and spirochete, apply paraffin or methylsilicone oil during cleaning, then gently wipe the paste with 1000-purpose sandpaper until clean.

It is a recycled plastic bag, but it is generally a waste bag in the process of making bags, which is quite different from the normal waste plastic. Because of its good barrier, freshness-keeping, moisture-proof, frost-proof, oxygen-proof and oil-resistant, this kind of membrane can be widely used in light and heavy packaging. Such as a variety of fresh fruits, meat, pickles, fresh milk, liquid drinks, medical supplies and so on.

Prevent and reduce the interference of external airflow. Power part energy saving: Most of them use frequency converters, which save energy by saving the remaining energy consumption of the motor, such as the actual power of the motor is 50Hz, and you only need 30Hz in production, which is a waste of excess energy consumption. Frequency converter is to change the power output of the motor to achieve energy saving effect.

Due to the friction between plastic and screw, between plastic and barrel, and between particles, it also gradually melts due to the heating outside the barrel. The deceleration and drive motor are composed of an electromagnetic speed-regulating motor (or a frequency-converting general motor) which drives the decelerator by belt drive to make the screw rotate in the barrel.